How to Empty Bunn Reservoir: A Step-by-Step Guide
Emptying the reservoir of a Bunn coffee maker is an essential maintenance task that ensures your coffee machine functions optimally. Whether you own a Bunn Brewmaster, Bunn Myca, or any other model, understanding how to empty the reservoir properly is crucial for maintaining the quality of your coffee. In this article, we will provide you with a step-by-step guide on how to empty your Bunn reservoir safely and efficiently.
Step 1: Turn Off the Coffee Maker
Before you begin, make sure to turn off the Bunn coffee maker. This is an important safety precaution to prevent any accidental spills or burns. Unplug the machine from the power source to ensure it is completely turned off.
Step 2: Remove the Reservoir
Locate the reservoir on the back or side of your Bunn coffee maker. There is usually a release lever or button that you need to press or pull to release the reservoir from the machine. Gently lift the reservoir out of its place.
Step 3: Empty the Reservoir
Place the reservoir on a flat and stable surface. Open the lid of the reservoir and pour out the remaining water. Be cautious while doing this to avoid spilling water on the floor or countertop.
Step 4: Clean the Reservoir
Once the reservoir is empty, it is important to clean it thoroughly. Use a soft cloth or sponge and mild dish soap to wipe down the inside and outside of the reservoir. Rinse it well with clean water to remove any soap residue.
Step 5: Inspect and Clean the Reservoir Lid
The reservoir lid may also need cleaning. Remove the lid and inspect it for any coffee stains or buildup. Use a cloth or sponge to clean the lid, ensuring that all surfaces are free of residue.
Step 6: Reattach the Reservoir
After the reservoir and lid have been thoroughly cleaned, dry them with a clean towel. Reattach the reservoir to the coffee maker by aligning the release lever or button with the corresponding slot on the machine. Make sure it is securely in place.
Step 7: Refill the Reservoir
Once the reservoir is clean and reattached, it is time to refill it with fresh water. Open the lid and pour in the desired amount of water. Close the lid securely.
Step 8: Turn on the Coffee Maker
Finally, plug in the Bunn coffee maker and turn it on. The machine should now be ready to brew fresh coffee.
By following these simple steps, you can easily empty your Bunn reservoir and maintain the quality of your coffee. Regularly cleaning and emptying the reservoir will help prevent any buildup or sediment that could affect the taste and performance of your coffee maker. Remember to always consult the manufacturer’s instructions for specific model recommendations and safety precautions.