How to Empty Fresh Water Tank in RV
If you are an RV enthusiast, one of the essential tasks you will need to perform regularly is emptying the fresh water tank. Properly emptying your RV’s fresh water tank is crucial for maintaining the functionality and longevity of your vehicle. In this article, we will guide you through the process of how to empty fresh water tank in RV, ensuring that you can enjoy your travels without any inconvenience.
Step 1: Locate the Fresh Water Tank Valve
The first step in emptying your RV’s fresh water tank is to locate the valve. Typically, this valve is located on the outside of the RV near the back. It may be labeled as the “fresh water tank valve” or simply have a handle with the word “freshwater” or “tank” written on it. Once you have found the valve, take note of its position and orientation, as you will need to return it to the same position after emptying the tank.
Step 2: Open the RV’s Waste Valve
Before you can start emptying the fresh water tank, you must first open the RV’s waste valve. This valve is usually located in the RV’s holding tank area, which is typically found under the vehicle. Look for a handle or lever labeled as the “waste valve” or “flush valve.” Once you have found it, open the valve to release any waste water that may be present in the tank.
Step 3: Open the Fresh Water Tank Valve
Now that the waste valve is open, it’s time to open the fresh water tank valve. Rotate the handle counterclockwise to open the valve. As the fresh water starts to flow out, it will help to clear any air from the tank and ensure a smooth draining process.
Step 4: Monitor the Water Flow
While the fresh water tank is draining, keep an eye on the water flow. If you notice that the water is not draining as quickly as expected, it may be due to a clog or blockage in the system. In this case, you may need to use a tank cleaner or a plunger to clear the blockage.
Step 5: Close the Fresh Water Tank Valve
Once the fresh water tank is empty, or the water flow has slowed to a trickle, it’s time to close the fresh water tank valve. Rotate the handle clockwise to close the valve. This will prevent any remaining water from dripping out of the tank.
Step 6: Clean and Inspect the Fresh Water Tank
After emptying the fresh water tank, it’s a good opportunity to clean and inspect the tank. Use a tank brush to remove any sediment or debris from the inside of the tank. Inspect the tank for any signs of damage or wear, and address any issues before refilling the tank.
Step 7: Refill the Fresh Water Tank
Once the tank is clean and inspected, you can refill it with fresh water. Simply open the fresh water tank valve and let the water flow into the tank until it reaches the desired level. Be sure to close the valve once the tank is full.
By following these steps, you can easily and efficiently empty the fresh water tank in your RV. Remember, regular maintenance and proper care of your RV’s water system will ensure a comfortable and enjoyable travel experience.
