How to Reset Onkyo Receiver TX-NR676
Are you experiencing issues with your Onkyo Receiver TX-NR676? Perhaps you’ve encountered a frozen screen or unresponsive buttons. Resetting your receiver can often resolve these problems. In this article, we will guide you through the process of resetting your Onkyo Receiver TX-NR676 to restore its functionality.
Firstly, it’s important to note that there are two types of resets you can perform on your Onkyo Receiver TX-NR676: a soft reset and a hard reset. A soft reset will restart the receiver without erasing any settings, while a hard reset will restore the receiver to its factory settings, which means you will lose any custom settings you have made.
Here’s how to perform a soft reset on your Onkyo Receiver TX-NR676:
1. Turn off the receiver by pressing the power button on the front panel or the remote control.
2. Locate the recessed reset button on the back of the receiver.
3. Using a paperclip or a similar object, gently press and hold the reset button for about 5 seconds.
4. Release the reset button and turn on the receiver by pressing the power button.
If a soft reset doesn’t resolve your issue, you can try a hard reset. Here’s how to perform a hard reset on your Onkyo Receiver TX-NR676:
1. Turn off the receiver by pressing the power button on the front panel or the remote control.
2. Locate the recessed reset button on the back of the receiver.
3. Using a paperclip or a similar object, gently press and hold the reset button for about 10 seconds.
4. Release the reset button and turn on the receiver by pressing the power button.
After performing a hard reset, the receiver will restore to its factory settings. You will need to set up the receiver again, including configuring the audio and video inputs, setting up the network, and adjusting the speaker settings.
Remember that a reset will erase all custom settings, so it’s a good idea to have a backup of your settings if you plan to perform a hard reset. You can usually find instructions on how to backup your settings in the user manual or on the Onkyo website.
In conclusion, resetting your Onkyo Receiver TX-NR676 can be a simple and effective solution to various issues. By following the steps outlined in this article, you can perform both a soft reset and a hard reset to restore your receiver to its optimal performance.
